Black & Decker BDWF7710 - Manual (Page 2)

When using electrical appliances, basic safety precautions should always be
followed, including the following:
❑ READ AND SAVE THESE INSTRUCTIONS.
❑ Use fan only for intended use, as described in instruction manual.
❑ To protect against electrical shock, do not immerse unit, plug, or cord in
water or spray with liquids.
❑ Close supervision is necessary when any appliance is used by or near
children.
❑ Unplug from outlet when not in use, when moving fan from one location
to another, before putting on or taking off parts and before cleaning.
❑ Never insert fingers, pencils or any other objects through the grille when
fan is running.
❑ Disconnect fan before cleaning.
❑ Make sure fan is on a stable surface when operating to avoid chance of
overturning.
❑ Do not place fan or any parts near an open flame, cooking or other
heating appliances.
❑ Do not operate any appliance with a damaged cord or plug, after the
appliance malfunctions or has been dropped or damaged in any manner.
Return the fan to the nearest authorized service facility for examination,
or electrical or mechanical adjustment. Or, call the appropriate toll-free
number listed on the cover of this manual.
❑ Do not use attachments not recommended by the manufacturer.
❑ Do not let cord hang over table or counter or touch hot surfaces.
❑ To disconnect, grip plug and pull from wall outlet. Never yank on cord.
❑ Always use on a dry, level surface.
WARNING: To reduce the risk of fire or electrical shock, do not use this
fan with any solid-state speed control device.
SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY
INSTRUCTIONS
POLARIZED PLUG (120V Models Only)
This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
Note: If the power supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in order to avoid
a hazard.
2 1
BDWF7710Pub1000001430 10/11/04 4:51 PM Page 2