Philips HD8833-47 - Manual (Page 18)

• 18 • • 18 •
Note: if the " " button
lights up steady immediately
after start-up, the machine needs
circuit priming; turn the selector dial
clockwise to the "
" position. When
the " " icon is displayed, turn the
selector back to " " position.
5 The " " light blinks quickly to show
the machine has entered the descal-
ing automatic programme; when the
" " light is steady, the 1
st limescale
removal phase is on.
6 Place an empty container under the
steam wand and another one under
the dispensing spout.
7 When the " " button is lit up steady,
turn the selector dial clockwise to the
"
" position; in this case the steam/
hot water wand starts dispensing the
descaling solution at regular intervals.
8 When the descaling solution in the
water tank is fi nished, the " " light
starts blinking.
9 Turn the selector dial to the " " posi-
tion.
Empty the container under the steam
wand and the one under the dispensing
spout.
10 When the " " icon lights up steady
on the display, remove the water tank.
11 Remove the water tank, rinse it and
fi ll it up to the "MAX" level with fresh
drinking water.
12 Place the tank back in the machine. The
" " light turns on steady to show the
machine has entered the rinse phase.
13 Place an empty container under the
steam wand and another one under
the dispensing spout.
When the " " button is lit up steady,
turn the selector dial clockwise to the
"
" position.
14 When the " " light is blinking, turn
the selector dial to the " " position.
15 When the " " button is lit up steady,
turn the selector dial clockwise to the
"
" position; in this case the steam/
hot water wand dispenses the rinsing
water continuously.