Bush Hog 295 - Manual

Bush Hog
®
TOUGH
290 Series Rotary Cutters
BUSH HOG ® TOUGH FeaTUReS
TOUGH eZ Clean Sloped 10 Gauge Decks
TOUGH
1/4 Inch Sidebands
TOUGH Replaceable Full Length Skids
TOUGH 130 HP Bush Hog Gearbox
TOUGH 5 Year Gearbox
Limited Warranty
TOUGH Powder Coat Paint
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 15
MODeLS 295 296 297
Cutting Width 5 ft 6 ft 7 ft
Cutting Capacity 3 inch diameter 3 inch diameter 3 inch diameter
Cutting Height 1 1/2 to 10 1/2 inches 1 1/2 to 10 1/2 inches 1 1/2 to 10 1/2 inches
Dimensions (transport width x length) 5 ft 6 inches x 6 ft 6 inches x 7 ft 6 inches x
8 ft 8 inches 9 ft 8 inches 10 ft 8 inches, 10 ft 1 inch
(single wheels), (double wheels)
Type Hitch 3 Point Cat. I, Cat. II 3 Point Cat. I, Cat. II 3 Point Cat. I, Cat. II
Standard & QH Standard & QH Standard & and QH
Deck Thickness 10 gauge 10 gauge 10 gauge
Sidebands 1/4 x 13 inches 1/4 x 13 inches 1/4 x 13 inches
Driveshaft ASAE Category 4 ASAE Category 4 ASAE Category 4
Gearbox 130 HP 130 HP 130 HP
Tractor PTO Speed 540 RPM 540 RPM 540/1000 RPM
Driveline Protection Slip Clutch Standard Slip Clutch Standard Slip Clutch Standard
Blade Holder(s) Round Round Round
Blades 1/2 x 4 inch uplift 1/2 x 4 inch uplift 1/2 x 4 inch uplift
Blade Tip Speed 15,551 FPM 15,268 FPM 15,268 FPM/540 RPM
15,047 FPM/1000 RPM
Tires Single Laminated Single Laminated Single or Dual Laminated
Minimum Tractor HP 35 PTO 45 PTO 55 PTO
Front and Rear Deflectors Front belting and rear bands standard, all 3 models
approximate Weight 906 lbs 1095 lbs 1328 lbs, 1420 lbs
Warranty 1 year limited warranty with a 5 year gearbox limited warranty
Options Front and rear chains Front and rear chains Front and rear chains
FeaTUReS Available in major tractor colors