9dispensing steam/making cappuccino, 10 cleaning and maintenance – Philips 740909008 User Manual

Page 25

Advertising
background image

25

DISPENSING STEAM - CLEANING AND MAINTENANCE

• Before dispensing hot water, make sure that the

green temperature ready light (24) remains lit.

When the machine is ready to dispense coffee,

proceed as follows:

• Press the button (27); the LED (28) will light up.

• Place and cup and/or a receptacle beneath the hot

water/steam tube (15).

Turn the knob (17) counter-clockwise.

• Dispense the desired amount of hot water; turn

the knob (17) clockwise to cut off the flow of hot

water.

• Press the button (27) again to switch the machine

back into the normal operating mode. The LED (28)

will go off.

9

DISPENSING STEAM/MAKING

CAPPUCCINO

The steam may be used to froth milk for cappuccino

and to heat other beverages.

Danger of scalding! Dispensing may be

preceded by brief sprays of hot water. The

dispensing tube can reach very high temperatures:

avoid touching it directly with your hands.

• Before dispensing steam, make sure that the

temperature ready LED (24) remains steadily lit.

The machine will be immediately ready to dispense

steam.

• Position the steam tube (15) over the drip tray and

open the “hot water/steam” knob (17) for a few

seconds to discharge residual water from the steam

tube; soon only steam will issue from the tube.

• Close the knob (17).

• Fill the receptacle you want to use for making

cappuccino 1/3 of the way with cold milk.

To ensure best results when making

cappuccino, make sure both the milk and

receptacle are cold.

Place the tip of the steam tube in the milk to

be heated and open the knob (17); slowly raise

the receptacle, with gentle rotating movements, to

obtain an even layer of foam.

• After dispensing the amount of steam desired, close

the knob (17).

• The same procedure may be used to heat other

beverages.

After this operation, wipe the steam tube clean with

a damp cloth.

You can immediately brew coffee into the freshly frothed

milk to prepare a real Italian-style cappuccino.

10

CLEANING AND MAINTENANCE

Basic cleaning

• Maintenance and cleaning may be carried out only

when the machine is cold and disconnected from

the power supply.

• Do not immerge the machine in water and do not

place any of its components in a dishwasher.

• Do not use sharp objects or aggressive chemical

products (solvents) for cleaning.

It is recommended that you clean the water

container daily:

- Remove the filter (C) located inside the container,

and rinse with clean drinking water.

- Return the filter (C) to its slot, pressing gently

while turning slightly.

- Fill the container with fresh drinking water.

Use the brush provided to clean the ground coffee

dispenser daily when in use.

• Use a soft cloth moistened with water to clean the

machine.

• Do not dry the machine and/or its components in a

microwave and/or conventional oven.

Clean the machine compartment and the

dispensing unit, we recommend emptying out the

dregs box (10) every day.

• The coffee dispenser (14) may be removed for

cleaning. Rinse the dispensing channels thoroughly

with hot water.

10.1 Dispensing unit

• The dispensing unit (18) must be cleaned every

time you fill the ground coffee container or, in any

case, at least once a week.

• Turn off the machine by setting the power switch

(7) to -0- and remove the plug from the power

socket.

Advertising