On-screen display (osd) – Barco MFCD 1219 User Manual
Page 24
On-screen display (OSD)
24
OSD Control Menu
To unlock the Controls, proceed as follows:
1.
Press the Power key to switch off the display.
2.
With one hand, press and hold the < (left) and the > (right) key at
the same time. With the other hand, press the Power key shortly
to switch the display on again.
3.
Keep holding the < (left) and the > (right) key for about 3 seconds.
4.
At last, release the < (left) and the > (right) key.
Now, by pressing the Menu key, the message “Unlocked” will
appear.
Function
Description
H OSD Position
Adjust the horizontal position of the OSD window
V OSD Position
Adjust the vertical position of the OSD window
OSD Timeout
Determine how long (in seconds) the OSD menu
waits before closing automatically when no action
is performed
Lock Controls
When you lock the controls, the OSD will not
appear when you touch the control keys
H OSD POSITION
>
V OSD POSITION
>
OSD TIMEOUT
>
LOCK CONTROLS
>
OSD CONTROL