Hale SMR User Manual
Preliminary, Smr-u stainless steel rear mount pump, Part 1: maintenance instructions
DESCRIPTION AND MAINTENANCE MANUAL
Hale Products cannot assume responsibility for product failure resulting from improper
maintenance or operation. Hale Products is responsible only to the limits stated in the product
warranty. Product specifications contained in this material are subject to change without notice.
SMR-U
Stainless Steel Rear Mount Pump
All Hale products are quality components: ruggedly designed, accurately machined, precision inspected, carefully assembled
and thoroughly tested. In order to maintain the high quality of your unit, and to keep it in a ready condition, it is important to
follow the instructions on care and operation. Proper use and good preventive maintenance will lengthen the life of your unit.
ALWAYS INCLUDE THE UNIT SERIAL NUMBER IN CORRESPONDENCE.
HALE PRODUCTS, INC. z A Unit of IDEX Corporation z 700 Spring Mill Avenue z Conshohocken, PA 19428 z TEL: 610-825-6300 z FAX: 610-825-6440
Hale SMR Pump Serial Number:____________________________________
MANUAL P/N 029-0020-77-0, REV 1, © 2004 HALE PRODUCTS, INC., PRINTED IN U.S.A.
02/10/2004
PART 1: MAINTENANCE INSTRUCTIONS
PRELIMINARY
Document Outline
- MAINTENANCE INSTRUCTIONS
- + WORKSHOP MANUAL for WS - Single Pressure Pump
- RECOMMENDED SPARES
- It is the responsibility of the user to ensure that the equipment is maintained in a safe operational condition, as per regulation 5 in the Provision and Use of Work Equipment Regulations 1998.
- Re-assembly of the seal is completed as described below. Please note: Mechanical Seals are precision-engineered devices and extreme care must be taken to ensure that no damage occurs to the lapped faces.
- LOW PRESSURE MANIFOLD AND FILTER HOUSING
- Supplement for World Series Pump Maintenance – WT