Hale CAFSPro User Manual
Page 11
Safety Precautions
❑
11
CAFSPro User Operation Manual
p/n: 029-0020-75-0
❑
DO NOT mount a radio transmitter or transmitter cables in direct or close
contact with the CAFSPro control unit. Direct contact could cause elec-
trical interference and disrupt the control panel or radio operations.
❑
DO NOT connect the foam pump main power lead to small leads that are
supplying some other device, such as a light bar or siren. The Hale
FoamLogix Model 3.3 and Model 5.0 require 60 AMP minimum current
and a 200 AMP (peak) minimum disconnect.
❑
When operating the Hale FoamLogix in Simulated Flow Mode an outlet
for the foam concentrate must be provided to prevent excessive pressure
buildup in the discharge piping or hoses.
❑
Make sure the foam tank and foam concentrate suction hoses are clean
before making final connection to foam pump. If necessary, flush the
tank and hoses prior to making any connections.