Hale Trailer - Manual (Page 15)

15 Safety - Skid & Trailer
p/n: 029-0810-00-0
Saf ety
❑
1 Safety Precautions
IMPORTANT !
HALE FIRE SKIDS AND TRAILERS ARE DESIGNED FOR OPTIMUM SAFETY OF
ITS OPERATORS. FOR ADDED PROTECTION, PLEASE FOLLOW THE
SAFETY GUIDELINES LISTED IN THIS SECTION AND ADHERE TO ALL WARN-
ING, DANGER, CAUTION AND IMPORTANT NOTES FOUND WITHIN THIS
MANUAL.
ALL SUPPLIED DOCUMENTATION (ENGINE, HALE PUMP, TRAILER MANU-
FACTURER’S MANUALS, ETC.) MUST BE CAREFULLY READ, UNDERSTOOD
AND ADHERED TO STRICTLY BY ALL INSTALLERS AND OPERATORS
BEFORE ATTEMPTING TO INSTALL OR OPERATE THE SKID OR TRAILER
PUMPING SYSTEM.
WHEN DEVELOPING DEPARTMENTAL APPARATUS OPERATING PROCE-
DURES, INCORPORATE THE WARNINGS AND CAUTIONS AS WRITTEN.
Hale is a registered trademark of Hale Products, Incorporated. All other brand and product
names are the trademarks of their respective holders.
NOTICE !
THE PROCEDURES IN THIS ADDENDUM ARE GENERAL OPERATING PRO-
CEDURES. THEY DO NOT REPLACE THE PROCEDURES, POLICIES OR
GUIDELINES ESTABLISHED BY THE AUTHORITY HAVING JURISDICTION,
NOR DO THEY REPLACE THE RECOMMENDATIONS AND PROCEDURES
PROVIDED IN THE APPARATUS MANUFACTURER'S MANUAL.
REFER TO THE PROCEDURES PROVIDED BY THE AUTHORITY HAVING
JURISDICTION ON SETTING WHEEL CHOCKS (TO PREVENT ANY MOVE-
MENT OF THE APPARATUS), AS WELL AS LAYOUT AND CONNECTION OF
HOSES, VALVES AND DRAIN COCKS.
ALL FASTENERS ON THE HALE SKID OR TRAILER ASSEMBLY ARE
SELECTED FOR THEIR APPLICATION. HALE PRODUCTS DOES NOT REC-
OMMEND REPLACING FASTENERS WITH ANYTHING OTHER THAN HALE
PART NUMBERS PROVIDED. REPLACING WITH A WEAKER ALTERNATIVE
POSES A SERIOUS SAFETY RISK.
ALL FASTENERS MUST BE INSTALLED WITH A LOCKING ANAEROBIC
ADHESIVE/SEALANT, SUCH AS LOCTITE
® #242, #246 OR EQUIVALENT.