Fluid Management 5G-HD Harbil 5-Gallon Shaker - Manual (Page 79)


Fluid Management Customer Service 1 . 800 . 462 . 2466 Harbil 5G Mixer | 77
Return of Paint Equipment and parts to Fluid Management requires a Return Goods Authorization (RGA) from Fluid
Management, and the RGA number must be included with any returned Paint Equipment or part.
Customer shall be required to provide Fluid Management and its Authorized Service Representatives with all information that
any of them may request concerning the maintenance, operation, use, service, failure or malfunction of Paint Equipment and
parts that are claimed to be defective.
Fluid Management may use reconditioned parts for warranty repairs and parts replacement.
Warranty repairs and part replacement do not extend the warranty period for Paint Equipment and repaired Paint Equipment
and replacement parts are warranted only for the remainder of the original warranty period.
Any repair or replacement requested as a warranty repair or replacement that is not covered by Fluid Management’s warranty
will be billed to Customer as non-warranty repair or replacement on a time and materials basis.
Fluid Management’s warranty transfers to the new owner with transfer of ownershipPaint Equipment. It is the responsibility
of new owner to notify Fluid Management at 1-800-462-2466 of the transfer of ownership of Paint Equipment. Transfer of
ownership does not extend the warranty period.
• Fluid Management’s warranty does not cover, extend orapply to, or include:
• Computer or computer-related equipment such as laptops, monitors and printers and other third-party equipment
supplied with Paint Equipment (In the case of computer and computer-related equipment such as laptops, monitors or
printer, and other third-party equipment, any warranty is limited to a pass through to Customer of any warranty received
from the equipment manufacture, and is subject to whatever terms, conditions and limitations are imposed by the
equipment manufacturer)
• Third–party software supplied with Paint Equipment (In the case of third-party software, any warranty is limited to
a pass through to Customer of any warranty received from the software provider and is subject to whatever terms,
conditions and limitations are imposed by the software provider)
• Normal wear and tear
• Any computer or computer-related equipment, other peripheral equipment, accessories, formulations, software or other
items provided by anyone other than Fluid Management, including Customer
• Any Paint Equipment or part failure or malfunction that Fluid Management or one of its Authorized Service
Representatives determines to have been caused by or attributable to any computer or computer-related equipment,
other peripheral equipment, accessories, formulations,software or other items provided by anyone other than Fluid
Management, including Customer
• Any Paint Equipment or part failure or malfunction that Fluid Management or one of its Authorized Service
Representatives determines to have been caused by or attributable to damage during or after shipment, colorant in the
wrong canister, colorant related issues (e.g. beads in colorant, colorant contamination, colorant thickening, changes
in colorant viscosity, defective/recalled colorant, etc.), overfilling of canisters, improper operation or misuse, lack of
daily maintenance, power surge, power outage, voltage incompatibility, fire, flood, water leakage, accident, acts of god,
casualty, or other similar causes. (For the avoidance of doubt, issues with motors, circuit boards and other electrical
components that could have been avoided with the use of a use a power conditioner are not covered)
Fluid Management Paint Equipment
Limited Warranty