Bakers Pride Classic-Line Proofer Heater CPH70-MP17 User Manual

Page 10

Advertising
background image

10

EXTERIOR CLEANING:

INTERIOR CLEANING:

!

!

CAUTION: Do not use steel wool or other abrasive cleaners. Do not use cleaners or sanitizers

containing lye, chlorine, iodine, ammonia or bromine as these will damage the finish on the stainless

steel.

!

!

CAUTION: Do not use steel wool or other abrasive cleaners. Do not use cleaners or sanitizers

containing lye, chlorine, iodine, ammonia or bromine as these will damage the finish on the stainless

steel.

!

!

CAUTION: Use only cleaners for stainless steel or aluminum: Fantastic, 409, Scotchbrite, dish

washing products are recommended.Follow all directions for safe use of these products.

!

!

CAUTION: Use only cleaners for stainless steel or aluminum: Fantastic, 409, Scotchbrite, dish

washing products are recommended.Follow all directions for safe use of these products.

Refer to

above when preparing and using cleaning solution.

Dip towel in cleaning solution

Wipe down exterior of unit.

pressure wash, hose-down, immerse, or spray the cabinet or any part of it. Follow with a clean

damp cloth to remove residual cleaning solution. Allow surfaces to air dry. Wipe exterior with towel and

stainless steel polish (or towel and lemon oil). Polish with a clean, soft cloth.

"CAUTIONS"

DO NOT

!!

CAUTION:

DO NOT

DO NOT

NOT

DO NOT

MOVING CABINET:

Disconnect cord set from power supply before cleaning.

use abrasives or harsh chemicals.

Open door all the way.
Remove ledge assemblies.
Remove holding or proofing unit, drip trough and air tunnel.
Clean holding or proofing unit.

spray electric heat unit with water or steam. Wipe with a damp cloth.

(Be sure electric cord is

plugged into power source.)

Wipe interior of unit with a towel and detergent solution.

pressure wash, hose-down, immerse, or spray the cabinet or any part of it. Remove

detergent residue with a clean damp towel.Allow surfaces to air dry.

Make sure door is secured before moving cabinet.
Unplug electrical cord before moving cabinet.
Empty water from proofing pan, if applicable.
Remove drip trough and pour out condensation before moving, if applicable.

!

!

!

!
!

!

!

!

!

!

Advertising