Gradall 524 Parts Manual - Manual (Page 131)

9-2
Item Part No. Qty. Description Of Part
1 Ref HYDROSTATIC DRIVE
TRANSMISSION
(see page 10-15 for details)
2 8866-2142 1 RUN TEE (includes item 3)
3 8859-1207 1 O-RING
4 8471-7839 1 HOSE ASSY
5 9108-3424 1 DIFFERENTIAL-LOCK VALVE
6 8866-2005 1 CONNECTOR (includes item 7)
7 8859-1204 1 O-RING
8 8471-7930 2 HOSE ASSY
9 8866-2239 1 SWIVEL NUT RUN TEE- 1/4 TUBE
10 8471-7816 1 HOSE ASSY
11 9130-3059 1 TUBE ASSY
12 8866-1362 1 HEX CAP- 1/4 TUBE
13 8471-7835 1 HOSE ASSY
14 8866-2239 1 SWIVEL NUT RUN TEE-1/4 TUBE
15 9108-3306 1 STRAIGHT THREAD ADAPTER
16 Ref FRONT DRIVE MOTOR ASSY,
(see page 10-16 for details)
17 8866-2064 1 MALE ELBOW, 90 DEGREES
Item Part No. Qty. Description Of Part
18 Ref SOLENOID VALVE,
(see page 10-11 for details)
19 8471-7872 1 HOSE ASSY
20 8866-2227 1 SWIVEL NUT BRANCH TEE, 3/4 TUBE
21 8866-1345 1 TUBE END REDUCER, 3/4X3/8
22 8471-7810 1 HOSE ASSY
23 8471-7906 1 HOSE ASSY (use with 9108-3066)
8471-9110 1 HOSE ASSY (use with oil cooler kit,
9112-5109)
24 Ref OIL COOLER ASSY,
(see page 5-6 for details)
25 8866-2108 1 ELBOW, 90 DEGREES, SWIVEL NUT
26 8866-2008 1 CONNECTOR, (includes item 27)
27 8859-1207 1 O-RING
28 Ref MAIN HYDRAULIC CONTROL VALVE
ASSY (see page 10-7 for details)
NOTE: ONLY ITEMS WITH PART
NUMBERS ARE AVAILABLE FOR
SERVICE.
HYDRAULIC CIRCUITS
Dump Circuit (524)
Starting Serial No. 0177005
Original Issue 1-90
Revised 2-23-98
KG
SEE PAGE 8-4
If oil cooler 9108-3066 has been replaced with
9112-5109 oil cooler kit, be sure when replacing
item 23, the correct hose is used.
SERVICE NOTE:
* Added service note and additional hose to item 23.
*
*