Fitting procedure – ARB 4410020 User Manual
Page 4
Advertising
FITTING PROCEDURE
5. Align the side steps and tighten all the
nuts, repeat for the other side.
6. Apply a bead of silicon along the top
edge of the side step.
7. Place the aluminium step plates on the
side steps and fix in place using the M6
x 25mm coach bolts, M6 panel washers
and M6 flange nuts.
Silicon
Last Rev Date: 25/11/2008
Page 4 of 4
Fitting instructions# 3783206
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
Advertising