Steele Products SP-GG900E - Manual (Page 13)

Owner’s Manual
12
Assembly
Unpacking
1. Remove the generator and loose parts box from the carton.
2. Compare the loose parts with the inventory list below.
Loose Parts (Wheel kit and handle)
Check all loose parts against the following list. Contact your dealer toll free at 888.896.6881
if any of the loose parts shown are not included with your generator
Hardware Check:
Your Hardware Kit should include:
1) 2 Handles with bolts and brackets
2) 4 (six) M8x40mm bolts, (6mm x 1.0) thread
3) 4 (six) M8 Nuts (6mm x 1.0) thread
4) 2 (two) rubber bushings with 2 nuts
5) 2 (two) axle shafts
6) 2 (two) washers
7) 4 (four) cotter pins
8) 4 (four) bolts and nuts
9) 1 (one) generator leg
10) 2 (two) wheels (not shown)
8
2
9
3
4
6
7
1
5