Steele Products SP-HI1200BP - Manual (Page 4)

STARTING YOUR HEATER
1. Open the portable heater package and remove the heater by
sliding it from the box. Make sure there is no obvious damages that
may have occurred during shipment.
2. Plug the power cord directly into a conventional 120V 15 A Outlet.
3. Press the red button on the upper left side of the heater to turn the
heater ON.
4. Give it about 30 seconds before the fan starts working and warm
air starts to flow out.
TURNING OFF YOUR HEATER
1. Press the red button on the upper left side of the heater to turn the
heater OFF.
2. The fan will remain on for 30 seconds then it will turn OFF.
Page 3