Steele Products SP-HO71 - Manual (Page 3)

* Always unplug the heater when not in use.
* Take care that the temperature switch and the thermostat are off while
plugging the heater.
* The power cable must be plugged into a socket which has been
grounded according to the relevant country standards.
* In order to prevent overheating of plug, it must be fully inserted in the
socket. The plug must never be loose in the socket.
* This heater is filled with a precise quantity of special oil. Repairs
requiring opening of the oil container are only to be made by the
manufacturer or his service agent who should contacted if there is an oil
leak.
* When scrapping the heater, follow the regulations concerning the
disposal of oil.
* If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
* This appliance is not intended for use by persons (including
children)with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
* Children should be supervised to ensure that they do not play with the
appliance.
* For mounting the castors see figure A to C.
3