Steele Products SP-PM207AC - Manual (Page 17)

Loosen
Tighten
1
2
3
Fig.11 Fig.12
NOTE:
Be sure to replace the parts in the exact order in which they were removed. When installing the cutting blade,
verify that it is installed with the curved ends pointing toward the mower deck.
CLEAN THE MOWER
WARNING: To reduce the risk of electric shock, do not expose the mower to water.
The underside of mower deck should be cleaned after each use as grass clippings, leaves, dirt and other debris will
accumulate causing rust and corrosion.
Remove any buildup of grass and leaves on or around the motor cover (do not use water). Wipe the mower clean with a
dry cloth occasionally.
mower forward, or on its side, and scrape it clean with an appropriate tool.
STORAGE
The following steps should be taken to prepare the lawn mower for storage.
in any way.
Plastic coverings trap moisture around the mower causing corrosion.
The handle may be folded away completely for storage.
OPERATING YOUR MOWER
16