Heater Craft 900 2011 2012 RZR Polaris - Manual (Page 3)

11.Check and tighten all hose clamps. Check hose routing and secure away from all moving parts.
12.Remove the radiator cap and pull the heater control knob to the on position. Fill the radiator with coolant.
Start and run the engine for a while filling the radiator as the air bleeds out (about 3 minutes). Replace
the cap, check for leaks and run the engine for several minutes. Check the heater function by turning the
blower on and feeling for warm air. Turn the engine off and allow time to cool. Refill radiator as necessary.
13.Replace rear panel and seats.
14.Replace the warning decal with the new one provided in the area forward of the defrost vent.11.Check
and tighten all hose clamps. Check hose routing and secure away from all moving parts.
12.Remove the radiator cap and pull the heater control knob to the on position. Fill the radiator with coolant.
Start and run the engine for a while filling the radiator as the air bleeds out (about 3 minutes). Replace
the cap, check for leaks and run the engine for several minutes. Check the heater function by turning the
blower on and feeling for warm air. Turn the engine off and allow time to cool. Refill radiator as necessary.
13.Replace rear panel and seats.
14.Replace the warning decal with the new one provided in the area forward of the defrost vent.
Photo 1 900 ONLY