AKiTiO Taurus Mini Super-S3 LCM - Manual (Page 10)

Taurus Mini Super-S3 LCD Display
[8]
3.3 HDD Information
Press the [Select] button until the HDD information menu is selected and then press the [OK]
button to start displaying further details about the installed hard drives. It will automatically cycle
through the different information displaying each screen for about 8 seconds and then return to the
main screen. To fast forward, press the [Select] button.
1. The main screen of the HDD information menu.
2. Displays the model number and serial number of the drive installed at HDD1.
3. Displays the total storage capacity and the temperature of the drive installed at HDD1.
4. Displays the model number and serial number of the drive installed at HDD2.
5. Displays the total storage capacity and the temperature of the drive installed at HDD2.
3.4 Settings
Press the [Select] button until the settings menu is selected and then press the [OK] button to enter
the configuration menu. You can now use the [Select] button to cycle through the different settings
and the [OK] button to further configure the device settings.
1. Option to enable or disable the support for large volumes in excess of 2TB.
2. Setup menu for the RAID settings.
3. Option to enable or disable the general alarm sound.
4. Setup menu to define how long the backlight for the LCD display stays lit.
5. To exit the settings menu and return to the main menu.