L.B. White Bertha and Torchman Torches - Manual (Page 8)

Specifications and Part Numbers
Operating Manual
Model BTUH Pressure/Fuel To rch Head Handle Orifice Valve Hose* Regulator
Bracket, Head, Orifice, Tube,
Thermocouple Pilot Pilot Pilot Pilot Nut Sleeve
130- 36 in. 550-
07966 120-03066 07079
This torch is completely assembled and tested by the
factory prior to shipment. Assembly is not required. IMPORTANT
The Model 164 natural gas torch requires a maximu m
of 15 PSIG and a minimum of 10 PSIG at the inlet of
the regulator to achieve the 7 PSIG outlet pressure
necessary to obtain rated heat output.
Make sure your natural gas utility is capable of
supplying this pressure to the inlet of the regulator.
400-03202 400-01079 310-01520 130-02542 130-02543
Cast Iro n 330-
164 320-01014 01018
2 1/3 in. OD x 8 in. 13 in.
550-
01104
7 PSIG
550-
20704
1/2 in. ID x
10 ft.
Inlet Max. 15 PSIG
Inlet Min. 10 PSIG
Outlet 7 PSIG
Natural Gas
130-
09698
310-01081
* Hose is ordered as an accessory and does not ship as standard with the torch.
Pilot
Safety
Valve
365,000
BTUH
8
Model 164