Belkin N150 - Manual (Page 17)

15
UsInG YOUR ROUTeR
enabling auto Update on Your belkin Router
The Router has the capability to automatically check
for a newer version of firmware and alert you when it’s
available. You can choose to download the new version or
ignore it. By default this feature is disabled. If you want to
enable it, select “Enable” and click “Apply Changes”.
note: We recommend you use a computer that
has a wired connection to the Router.
setup steps:
1 . Open a web browser on the computer.
2 . In the address bar of the web browser, type “http://192.168.2.1”.
3 . Click “Login” in the upper right-hand corner of the page. The
Router does not ship with a password, so just click “Submit”.