BNC 7000 Series Programmer Manual User Manual
Programmer’s manual v1.1 (prelim), Series 7000 phase noise measurement systems
Advertising
1
Programmer’s Manual V1.1 (prelim)
SERIES 7000 Phase Noise Measurement Systems
Models MODEL 7070, MODEL 7300
Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com
Advertising
Table of contents
Document Outline
- 1 Introduction
- 2 Programming the SERIES 7000
- 2.1 LAN
- 2.2 Ethernet Interface Connection and Setup
- 2.3 Using Sockets LAN
- 2.4 Using and Configuring VXI-11 (VISA)
- 2.5 Using Telnet LAN (Port 18)
- 2.6 USB
- 2.7 USB-TMC Interface Connection and Setup using VISA
- 2.8 USB-TMC Interface Connection and Setup using Berkeley Nucleonics API
- 2.9 GPIB Interface Connection and Setup
- 2.10 Using SCPI for SERIES 7000
- 3 IEEE-488 Interface Commands
- 4 SCPI Commands
- 5 SCPI Command Description
- 6 Examples (NEEDS REWORK)