Poison Spyder WINCH FAIRLEAD MOUNT - Manual

INSTALLATION INSTRUC
TIO
NS
©2010 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
WINCH FAIRLEAD MOUNT INSTALL NOTES
The Poison Spyder Customs Winch Fairlead
Mount is designed to work with bumpers and
winch mounts that do not already have an
integrated fairlead mount.
Installation is fairly simple with the right tools
and good mechanical abilities. If you are not
confident in your mechanical skills, please
seek the help of a professional to perform the
installation. Please read through these entire
instructions before proceeding with installation.
PARTS LIST
(1) Winch Fairlead Mount
TOOLS NEEDED
• Wrenches (to fit the existing hardware of
your winch and fairlead)
INSTALLATION NOTES
VERY IMPORTANT: Read and follow your winch
manufacturer’s Owners Manual and Operating
Instructions prior to operating your winch. Follow
all safety precautions during any operation of
your winch.
• Before you begin, park the vehicle in a
suitable workspace and set the parking
brake.
• The Winch Fairlead Mount comes
powdercoated black. Be careful to protect
the powdercoat finish during installation. If
you wish to paint the mount a different color,
scuff the powdercoat with sandpaper then
apply primer followed by the color of your
choice.
• Install the Winch Fairlead Mount BETWEEN
the winch and the bumper or winch plate.
You may need longer bolts (not included)
to secure the winch to the bumper or winch
plate, to compensate for the thickness of the
Winch Fairlead Mount.
• The Winch Fairlead Mount is designed to fit
the 10” x 4-1/2” bolt pattern common to most
Warn winches except 8274. Many other
winch brands use the same bolt pattern.
• The Winch Fairlead Mount is designed to
fit the winch rope slot and 10” bolt pattern
of most Warn or common aftermarket roller
or Hawse fairleads. Install your fairlead
according to the fairlead manufacturer’s
instructions.