Buffalo Technology WBR-B11 - Manual (Page 8)

8
◗
DSL
Select this option if your internet
connection is provided by a
DSL provider. Most DSL providers
require PPoE settings to be
entered.
◗
CATV / Cable
Select this option if your internet
connection is provided through
your cable provider. Most
cable providers require no
aditional settings except to obtain
an IP.
■ NOTE: After selecting either the DSL or CATV wizard, please choose the proper
selections that are applicable to your internet service provider. A verifi cation test
will be run at the end of the wizard.
◗
Advanced
Select this option for advanced settings of your AirStation. For more information on
confi guring advanced settings of your AirStation, please refer to the User Manual
on the AirNavigator CD or the Buffalo Wireless Support Web Site: http://www.
buffalotech.com/wireless/support
◗
Default Settings
If at any time you wish to restore settings to factory defaults, press the red INIT
button on the back-side of the AirStation for 5 seconds. During this process the
red DIAG light will become lit. Once it is lit, release the button. The reset process
can take up to two minutes.
The fi rst page of the confi guration offers 3 distinct buttons for DSL, Cable, and
Advanced settings. Select the appropriate type of Internet service, referencing the
information you collected during the preparation steps if needed.