Poison Spyder D-RING SHACKLE TAB - Manual

INSTALLATION INSTRUC
TIO
NS
©2012 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
D-RING SHACKLE TAB INSTALLATION NOTES
The Poison Spyder Customs D-Ring Shackle
Tab is designed to provide fabricators with a pre-
made, easy to install recovery attachment point.
INSTALLATION NOTES
VERY IMPORTANT: Installation should only
be performed by an experienced fabricator
or certified welder. If you are not confident in
your fabrication or welding skills, see your local
fabrication or welding shop to perform final
welding of the Shackle Tab.
Only attach the Shackle Tab to a strong,
STRUCTURAL member of your vehicle, bumper,
etc. The tab will see extreme forces under use,
and although it is 1” thick, it is only as strong as
the material it is attached to and the quality of the
welds. If welding to round tube, make sure that it
is AT LEAST .120” wall thickness if it is DOM or
chromoly tubing, or at least .150” wall thickness
for welded seam tubing. Flat plate should be
at least 3/16” thick if gussetted directly behind
where the shackle tab is welded, or 1/4” thick if
it will be attached to a span between structural
gusseting. These are basic guidelines and
minimums, your final design should be subject
to the scrutiny of an experienced fabricator.
Carfeully consider placement of the shackle tab.
Confirm that its location is ideal for all aspects of
use as an attachment point, clearance from the
rocks, easy access, etc.
WARRANTY
Poison Spyder Customs™ warranties all of
the products we sell and distribute for one (1)
year from the date of sale. These products will be
free from defects in material and workmanship
under normal installation, and use. Due to the
intended use the powder coat finish is warranted
for ninety (90) days. The finish warranty will not
cover a product if it has been damaged in any
way. Warranty is limited to repair or replacement.
Poison Spyder Customs™ does not offer any
type of labor or shipping allowance and all
warranty claims are subject to inspection by
Poison Spyder Customs™.
At the discretion of Poison Spyder Customs™,
the products in question can be repaired or
replaced when found defective. Prior to any
replacement or repair, written authorization must
be obtained from Poison Spyder Customs™.
Failure to contact us prior to having warranty work
preformed will immediately void all applicable
warranties; and it is then the sole responsibility
of the customer to remit any payment incurred.
The warranty expressed above is the sole
warranty of Poison Spyder Customs™, and
any other expressed or implied warranties are
hereby specifically excluded and disclaimed.
HOLD HARMLESS AGREEMENT
1. In purchasing a Poison Spyder Customs
Product™ I release, waive, discharge and
covenant not to sue Poison Spyder Customs
officers, servants, agents, or employees
(hereinafter referred to as Releasees) from
any and all liability, claims, demands, actions
and causes of action whatsoever arising out
of or related to any loss, damage, or injury,
including death, that may be sustained by
me (or anyone else), any property belonging
to me (or anyone else), whether caused by
the negligence of the releasees or otherwise,
while working on, using or any activity related
to this product.
2. I am fully aware of risks and hazards connected
with the use of a this product and I elect to