Poison Spyder JK ROCKER KNOCKERS Frame-Mount - Manual

©2014 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
INSTALLATION INSTRUC
TIO
NS
Frame-Mount JK Rocker Knockers™ Installation
Thank you for purchasing Poison Spyder
Frame-Mount Rocker Knockers™ for your Jeep
JK. This product is easy to install with the right
tools and good mechanical abilities. If you are
not confident in your mechanical skills, please
seek the help of a professional to perform the
installation. Please read through these entire
instructions before proceeding with installation.
IMPORTANT: Completely install and remove the
product BEFORE painting or powder coating it.
This will allow you to check for fitment or do any
clearancing or fitting ahead of time, to reduce
the chance of damage to the finish during final
installation. Poison Spyder Customs Inc. is not
responsible for costs for or damage to paint or
powder coat finish under any circumstances,
including paint or powder coat of incorrectly
shipped or defective parts.
PARTS LIST
Please check your packages immediately upon
arrival to ensure that everything listed is included,
and to check for damage during shipping. If
anything is missing or damaged, call Poison
Spyder at (951) 849-5911 as soon as possible.
(1) Driver side JK Rocker Knocker, Frame-Mount
(1) Pass. side JK Rocker Knocker, Frame-Mount
(1) 1/2” ID X 1-1/4” OD X 3/16” thick spacer
(2) 1/2-20 X 1 Gr. 8 Hex Head Cap Screw
(2) 1/2 Gr. 8 Flat Washer
(4) 3/8-16 X 1-1/2 Gr. 8 Hex Head Cap Screw
(2) 3/8-16 X 1 Gr. 8 Hex Head Cap Screw
(6) 3/8-16 Gr. 8 Nylon Insert Lock Nut
(12) 3/8 Gr. 8 Flat Washer
(2) M12-1.5 X 40MM Hex Head Cap Screw
(2) M12 Flat Washer
(2) M12 Lock Washer
The following items vary by model:
2-DR 4-DR
(22) (28) 1/4-20X3/4 SS flat head cap screw
(22) (28) 1/4-20 nylon insert lock nut
(22) (28) 1/4 flat washer
TOOLS NEEDED
• Mechanic’s tool set with a standard
assortment of metric and SAE wrenches,
sockets, pry bars, etc.
• 1/4” & 29/64” drill bits and drill motor
• 1/2-20 threading tap & tap handle
• Anti-sieze compound
• Pneumatic or electric cut-off wheel & grinder
(some year models only)
• Fine-tip felt pen or center punch & hammer