Poison Spyder LJ RICOCHET ROCKERS & ROCKER KNOCKERS - Manual

INSTALLATION INSTRUC
TIO
NS
©2009 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
LJ RICOCHET ROCKERS &
ROCKER KNOCKERS INSTALLATION
Thank you for purchasing Poison Spyder Rocker
Knockers (shown above) or Ricochet Rockers
for your Jeep LJ Unlimited. You now own the
ultimate in rocker panel protection for your Jeep.
If you purchased Rocker Knockers with the
Slider option, these have already been welded
to the Rocker Knockers and install in the same
manner, as do the Ricochet Rockers. Installation
is fairly simple with the right tools and good
mechanical abilities. If you are not confident in
your mechanical skills, please seek the help of a
professional to perform the installation. Please
read through these entire instructions before
proceeding with installation.
PARTS LIST
(1) Driver side Rocker Knocker
(1) Passenger side Rocker Knocker
(10) 3/8-16 X 1 SS flat head cap screw
(10) 3/8 flat washer
(10) 3/8-16 nylon insert lock nut
TOOLS NEEdEd
• 9/16” socket or end wrench
• 5/8” socket
• 6” socket extension
• Ratchet
• 7/32” hex key or hex socket
• Auto-punch or center punch and hammer
• Drill motor
• 3/16” drill bit
• 3/8” drill bit
• Rat-tail file or burr knife
• Torque wrench
• Touch-up paint or clear coat
• Floor jack and extension
BEfORE YOu BEgIN
• Paint or powdercoat both the inside and
outside of the Rocker Knockers. If painting
them yourself, take the time to do a thorough
job cleaning the Rockers and making sure
they are completely free of dirt, grease or
oils, solvents or cleaner residue. Sanding or
scuffing the surface will also help the primer
and paint to adhere. Use a quality etching
primer, then paint in your color of choice.
• Park the Jeep on a flat, level surface and set
the emergency brake.
• Be sure that the sides and undercarriage of
the vehicle, in the areas you will be working,
are clean and clear of debris and mud.
• Remove any fender lares or rocker panel
covers or moldings that will interfere with
the Rocker Knocker or Ricochet Rocker
installation.