Poison Spyder JK LED TAILLIGHT HARNESS - Manual

©2014 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
INSTALLATION INSTRUC
TIO
NS
41-06-010-P • JK LED Taillight Harness - Passenger Side
41-06-010-D • JK LED Taillight Harness - Driver Side
41-06-020 • 24in LED Back-Up Light Extension Harness (Pair)
41-06-030 • 4in LED Back-Up Light Extension Harness (Pair)
Thank you for purchasing Poison Spyder’s JK
LED Taillight Harness system. Depending on
the components you chose, you may not have all
of the items shown in the photos above. Simply
disregard the instructions for any components
you are not using in your own installation.
Installation is fairly simple with the right tools
and good mechanical abilities. If you are not
confident in your mechanical skills, please
seek the help of a professional to perform the
installation. Please read through these entire
instructions before proceeding with installation.
Please check your packages immediately upon
arrival to ensure that everything you ordered
is included, and to check for damage during
shipping. If anything is missing or damaged,
call Poison Spyder at (951) 849-5911 as soon
as possible.
TOOLS NEEDED
• Phillips screwdriver
• Zip-ties
• Sheet metal screws & drill with driver bit
NOTE: Installation assumes the use of 4” round
LED taillights and 2-1/2” round LED back-up
lights sold by Poison Spyder Customs. Other
manufacturers’ lighting products may also be
compatible, however they are not guaranteed to
work with this harness.
INSTALLATION PROCEDURE
1. Park vehicle on a level surface, place the
transmission in gear or park, and set the
emergency brake. Wear safety glasses from
this point on.
2. Beginning on the passenger side, use
a Phillips screwdriver to remove the stock
taillight assembly from the Jeep. Note that
there are four screws, one in each corner
of the taillight housing. You only need to
remove the two inboard screws. Once these
two screws are removed, grip the taillight
assembly, slide it slightly toward the center
of the Jeep and pop it out.
JK LED TAILLIGHT HARNESS INSTALLATION