Poison Spyder JK REAR CRUSHER FLARES - Manual

©2010 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
INSTALLATION INSTRUC
TIO
NS
Thank you for purchasing Poison Spyder Rear
Crusher Flares for your Jeep JK. Installation
is fairly simple with the right tools and good
mechanical abilities. If you are not confident in
your mechanical skills, please seek the help of a
professional to perform the installation. Please
read through these entire instructions before
proceeding with installation.
PARTS LIST
Please check your packages immediately upon
arrival to ensure that everything listed is included,
and to check for damage during shipping. If
anything is missing or damaged, call Poison
Spyder at (951) 849-5911 as soon as possible.
(1) Right side JK Rear Crusher Flare
(1) Left side JK Rear Crusher Flare
(1) Right-front Inner Brace, JK Rear Cr. Fl.
(1) Right-rear Inner Brace, JK Rear Cr. Fl.
(1) Left-front Inner Brace, JK Rear Cr. Fl.
(1) Left-rear Inner Brace, JK Rear Cr. Fl.
(14) 5/16-18 nut-sert
(14) 5/16-18 X 1 SS flat head cap screw
(16) 5/16-18 X 3/4 SS button head cap screw
(4) 5/16-18 X 2 SS flat head cap screw
(40) 5/16 flat washer
(20) 5/16-18 nylon insert lock nut
(1) Nut-Sert Install Tool
TOOLS NEEDED
• 1/2” open end wrench
• 3/16” hex key or driver bit and ratchet
• 1/2” drill motor
• 17/32” drill bit
• 5/16” drill bit
• Removal tool for
push-in retainer
clips (see figure 1)
• Touch-up paint or
clear coat
BEFORE YOU BEGIN
OPEN YOUR PACKAGES AND INSPECT THE
CONTENTS IMMEDIATELY. Contact Poison
Spyder customer service at 951-849-5911
immediately to report any missing, damaged
or defective items, including the hardware
pack. Poison Spyder Customs, Inc. can not
be responsible for claims of missing items or
damage due to shipping or packaging, when
notified more than seven days after delivery.
JK REAR CRUSHER FLARES INSTALLATION
FIGURE 1