Poison Spyder STEERING BOX SKID - Manual

INSTALLATION INSTRUC
TIO
NS
©2009 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
STEERING BOX SKID INSTALLATION
Poison Spyder Customs Steering Box Skid fully
protects one of your Jeep’s most vulnerable
and vital components: your steering gear box.
Installation of the Steering Box Skid should take
less than one hour.
PARTS LIST (YJ)
(1) Steering Box Skid
(2) 3/8-16 X 1 button head cap screw
(4) 3/8 flat washer
(2) 3/8-16 nylon insert lock nut
PARTS LIST (TJ & LJ)
(1) Steering Box Skid
(1) 1/2-13 X 1 button head cap screw
(2) 1/2 flat washer
(1) 1/2-13 nylon insert lock nut
TOOLS NEEDED
• T55 Torx wrench or socket with ratchet
• Drill motor
• 3/8” (YJ) or 1/2” (TJ or LJ) drill bit
• 7/32” (YJ) or 5/16” (TJ or LJ) hex key (Allen
wrench) or socket with ratchet
• 9/16” (YJ) or 3/4” (TJ or LJ) end wrench or
socket with ratchet
INSTALLATION PROCEDURE
1. Remove the lower torx bolt that holds the
bumper in place on the driver’s side of the
frame On the outside of the frame rail,
remove the two forward bolts that hold the
steering box in place (there are other bolts
that hold the steering box in place, so there
is no need to support the steering box).
2. Hold the steering box skid in place and
thread all three bolts that were removed
back into place. Torque these bolts to factory
specs.
3. On the Steering Box Skid there is one more
hole that is located to the far left (if you are
looking at the front of the Jeep) that is flush
with your OE bumper. Drill a 3/8” (YJ) or
1/2” (TJ & LJ) hole through the OE bumper
using the hole in the skid plate as a template.
Use the provided hardware to finish the
installation.
WARRANTY
Poison Spyder Customs™ warranties all of the
products we sell and distribute for one (1) year
from the date of sale. These products will be
free from defects in material and workmanship
under normal installation, and use. Due to the
intended use the powder coat finish is warranted
for ninety (90) days. The finish warranty will not
cover a product if it has been damaged in any
way. Warranty is limited to repair or replacement.
Poison Spyder Customs™ does not offer any
type of labor or shipping allowance and all
warranty claims are subject to inspection by
Poison Spyder Customs™.
At the discretion of Poison Spyder Customs™,
the products in question can be repaired or
replaced when found defective. Prior to any
replacement or repair, written authorization must
be obtained from Poison Spyder Customs™.
Failure to contact us prior to having warranty work
preformed will immediately void all applicable
warranties; and it is then the sole responsibility
of the customer to remit any payment incurred.
The warranty expressed above is the sole
warranty of Poison Spyder Customs™, and
any other expressed or implied warranties are
hereby specifically excluded and disclaimed.