Poison Spyder TJ LOWER A-PILLAR LIGHT MOUNTS - Manual

©2013 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
INSTALLATION INSTRUC
TIO
NS
Thank you for purchasing Poison Spyder
products for your Jeep. Installation is fairly simple
with the right tools and good mechanical abilities.
If you are not confident in your mechanical skills,
please seek the help of a professional to perform
the installation. Please read through these entire
instructions before proceeding with installation.
PARTS LIST
Please check your packages immediately upon
arrival to ensure that everything listed is included,
and to check for damage during shipping. If
anything is missing or damaged, call Poison
Spyder at (951) 849-5911 as soon as possible.
(1) Driver Side Lower A-Pillar Light Mount
(1) Passenger Side Lower A-Pillar Light
Mount
(1) Driver Side Lower A-Pillar Rubber Liner
(1) Passenger Side Lower A-Pillar Rubber
Liner
(4) 5/16-18 X 1 SS Button Head Cap Screw
(4) 5/16 SS Flat Washer
INSTALLATION NOTES
•
This product is designed primarily for
mounting the Rigid Industries Dually or
Dually D2 LED lights. No guarantee is made
regarding fitment of other brands of off-road or
auxiliary lights, however it will likely work with
most lights that are in a compact housing. The
light mounting hole is 7/16”.
• Remove the two bolts on the front-ward side
of the windshield brace on the lower A-Pillar
• Place the rubber liners between the mount
and the lower A-pillar, to protect the Jeep’s
paint.
• If installing the Lower A-Pillar light mounts
in conjunction with Poison Spyder’s A-Pillar
Light Bar Mounts, the provided stainless steel
button head cap screws will be necessary, as
the stock hardware is too short when stacking
both brackets. If installing the Lower A-Pillar
Light Mounts by themselves, use of the
provide stainless steel button head cap screws
is optional.
TJ LOWER A-PILLAR LIGHT MOUNTS