Bluesound POWERNODE Quick start guide - Manual (Page 6)

CONNECT TO WIFI
3
A On your tablet or smart phone, look for the WiFi
network (hotspot) matching your Powernode’s unique
network ID, and join it. The network ID is listed as the
product name (i.e. Powernode) immediately followed
by the last four digits in the MAC (Machine Access
Control) address (example: POWERNODE-001A).
The full 12-digit MAC address is printed on a sticker on
the back panel of your player.
B A web page may automatically open. If not, open a
web browser on your tablet or smart phone and enter
setup.bluesound.com, and press “Go”. A control panel
page should then appear.
C From the main menu displayed, select Configure WiFi.
D Select your Home WiFi network from the Configure
Wireless drop down menu.
E Enter your home network’s Wireless Password in the
field provided (if it is a protected network).
F Select a Room Name from the drop down list, or create
a customized room name in the field provided.
G Press Update and wait for the unit’s light to turn solid
blue, indicating that the player has successfully joined
your home WiFi network.
H Repeat steps A-G for each additional Bluesound
player.
I Reselect your home WiFi network from your tablet or
smartphone’s main network settings.
Alternatively, the Powernode can be connected
directly to your wired home network or router using
the Ethernet cable provided.
To see an instructional video on WiFi Setup, please visit
www.bluesound.com/support/setup
6_