SkyTrak 6036 Tier II Operation Manual - Manual (Page 65)

Operation
59 Model 6036
Starting Travel
1. Enter the operator cab, fasten the seat belt, start the engine, apply
the service brake pedal and disengage the parking brake switch.
Place the Neutral Lock Lever in the (D) DRIVE position.
2. Rotate the twist grip (4) of the range select lever to 1st gear.
3. Move the travel select lever to (F) FORWARD to travel in a forward
direction or to (R) REVERSE to travel backward.
4. Slowly remove your foot from the service brake pedal and press the
accelerator pedal to start travel.
IMPORTANT! Check for warning lights frequently during operation. Any
abnormal indication should be corrected as soon as practical.
Operating
OH1803
4