PureFlow AirDog DF-165 - Dodge Cummins 1994-1998 - Manual (Page 19)

19
PureFlow AirDog
AirDog
®
II Dodge Cummins 1994 - 1998
Section 6 Electrical Harness
The AirDog
®
II is equipped with a relay controlled wiring harness.
WIRING DIAGRAM (In Red)
Figure 45
The AirDog
®
II relay controlled wiring harness connects directly to the fuse panel.
AirDog®II Pump Motor Lead
*Pressure Sensor/Switch Lead
*Indicator Light Lead
Battery Positive Lead
Battery Negative Lead
Mini Fuse Tap Relay Lead
Figure 46
CAUTION: If the OPTIONAL Low Pressure Indicator Light is not used, be sure to insulate
the two (2) #10 Indicator Light connectors and pressure sensor lead to prevent accidental
contact.
* The light kit is sold separately and is not included in the kit.
Securing the Relay and Fuse Holder to the Vehicle
6-1. Secure the relay and fuse holder to the vehicle.
Figure 47 Figure 48