The airdog – PureFlow AirDog DF-200 - Dodge Cummins 1994-1998 User Manual
Page 18
18
PureFlow AirDog
AirDog®II DF-200
Dodge Cummins 1994 - 1998
Section 6 Electrical Harness
The AirDog
®
II is equipped with a relay controlled wiring harness.
WIRING DIAGRAM (In Red)
Figure 44
The AirDog
®
II relay controlled wiring harness connects directly to the fuse panel.
AirDog®II Pump Motor Lead
Pressure Sensor/Switch Lead
Indicator Light Lead
Battery Positive Lead
Battery Negative Lead
Mini Fuse Tap Relay Lead
Figure 45
CAUTION: If the OPTIONAL Low Pressure Indicator Light is not used, be sure to insulate
the two (2) #10 Indicator Light connectors to prevent accidental contact.
Securing the Relay and Fuse Holder to the Vehicle
6-1.
Secure the relay and fuse holder to the vehicle.
Figure 46
Figure 47