Cleaning foreign debris from the gearotor assembly, Airdog – PureFlow AirDog FP-150 - 6.4L Ford 2008-2010 User Manual
Page 22
22
AirDog
®
FP-100 & FP-150 Ford PowerStroke 2008 6.4L
Section 9 AirDog® Fuel Pump
Cleaning Foreign Debris from the Gearotor Assembly
Step 1 Step 2
Step 3
Remove the four (4) button Carefully remove the O’ring, Remove and clean the gearotor.
head cap crews that secure you will need to re-use it.
Be very careful not to damage
the gearotor cap.
the gearotor.
Step 4
Step 5
Step 6
Clean the inside of the
Replace the O’ring and
Align the teeth and
gearotor pocket.
center gear.
install the outer gear.
Step 7
Step 8
Install the gearotor cap. Be very
Replace the cap into
careful to index the cap to position
position. Be very careful,
the wide space between the half
do not pinch the O’ring.
moon cuts to the bottom.
Torque the cap screws.
in an opposing pattern.
1
4
3
2