GrimmSpeed Gold Paint Guide - Manual

Grimmspeed 1
GrimmSpeed Gold Paint
Application Instructions
GrimmSpeed Gold Paint Application Instructions
Preparing Wheel for Paint
1. Wet Sand with 300+ Grit Sand paper
2. Spray 1 to 2 coats of all purpose primer. Let dry as recommended on
primer can.
Painting Wheel
1. Apply 3-4 even coats of GrimmSpeed Gold Paint allowing 15 minutes
between each coat.
2. Apply 1-2 even coats of clear coat.
3. Let wheels dry overnight (at least 8 hours) before use.
NOTE: Painting must be done in a well vented area. Paint fumes should not
be breathed in. Users must wear respirators during application.
Please contact us if you have any questions during installation.
651.414.9747 or [email protected] .
Thank you for your purchase!