CARR 147101 GX2 Multi-Mount - Manual

GX2 STEP MULTI-MOUNT INSTALLATION INSTRUCTIONS
PART NO’S: 147102 & 147101
MATERIALS NEEDED: Drill motor, 3/8" drill bit, 1/4" drill bit, 1/8" drill bit, pencil,
Phillips screw driver, center punch, two ½" wrenches , two 7/16" wrenches, silicone
MATERIALS FURNISHED:
Two hardware packs, two step castings, four zinc plated steel brackets, instruction page.
Vehicle body metal
Pinch Weld
Quality and Style that Endures Quality and Style that Endures Quality and Style that Endures Quality and Style that Endures
Follow the Diagram below and
the Written Directions on the
back carefully for a proper,
safe installations.
Should you encounter an
unusual, unforseen problem,
contact our Technical Help
Line
7:00 AM - 3:00 PM
Pacific Time
(951) 719-1068
www.CARR.com
©CARR PATTERN CO., INC.
WAX YOUR STEP WAX YOUR STEP WAX YOUR STEP WAX YOUR STEP
ON A REGULAR ON A REGULAR ON A REGULAR ON A REGULAR
BASIS TO BASIS TO BASIS TO BASIS TO
MAINTAIN ITS MAINTAIN ITS MAINTAIN ITS MAINTAIN ITS
LUSTER! LUSTER! LUSTER! LUSTER!
THIS STEP FITS THE FOLLOWING VEHICLE:
FORD
‘99 -‘06 Super Duty all cabs/all doors/all series
‘00 -‘02 Excursion all doors
5/16 Jam Nuts
Angled reinforcing
metal
Bracket Mounting
face