CARR 210881 Jeep XRS Rota Light Bar - Manual

Quality and Style that Endures
Follow the diagram and the written
directions carefully for a proper,
safe installation.
Should you encounter an unusual,
unforeseen problem, contact our
Technical Help Line
7:00 AM – 3:00 PM Pacific Time
(951) 719-1068
Visit our web-site at
www.CARR.com
Carr Pattern Co., Inc.
MATERIALS NEEDED: Wrench for T40 Torx or an 3/16” Allen wrench, Loctite
MATERIALS FURNISHED: Two Mounting End Brackets (3), two Rota Square
Castings (2), two Rota Hood Castings (1), one Cross Bar, and one Hardware Pack.
XRS ROTA JEEP MOUNTING INSTRUCTIONS
Part No. 210881
THIS LIGHT BAR FITS THE FOLLOWING VEHICLES:
JEEP
’76 – ’95 CJ7 / YJ Wrangler
Rubber Gasket
5/16” X 1” Black
Socket Head Bolts
and 5/16” Black
Washers.
Rubber
Grommet
Welded Nut
Cross Bar
5/16” Bolt
3/8” Bolt
1/4” Socket Bolts
& Nylon Black
Washers
Rota Hood Casting (1)
Rota Square Casting (2)
Mounting End
Bracket (3)
Detail A
Feed lighting wires through
loops.
Cross Bar Welded Nut
Detail B
Underside of
Light Bar