Hyline Offroad TJ/YJ TIRE CARRIER READY REAR BUMPER - Manual

Proudly Made In USA
Vehicle Fitment:
1987-2006 Jeep Wrangler &
Unlimited Installation Instructions:
TJ & YJ Standard Rear Bumper
Part Number: TJ-YJ-20SRB(T)
Drill
7/16” Bit
18mm Wrench
5/8” Wrench
11/16” Wrench
Ratchet
18mm Socket
5/8” Socket
Torque Wrench
Tools Needed Parts List
Qty:
1 Standard Rear Bumper
2 Left & Right Frame Tie-in
Brackets
2 Spacer Shims
8 7/16-20 x 1-3/4” Gr8 Bolts
8 7/16” Gr8 Flat Washers
8 7/16” Gr8 Lock Washers
4 7/16-14 x 3-1/2” Gr5 Bolts
4 7/16-14 Gr5 Hex Nut
8 7/16” Gr5 Flat Washers
4 7/16” Gr5 Lock Washers
Safety Glasses
Optional Winch Installation
Congratulations on your purchase of the Hyline Offroad Standard Rear Bumper. Our Bumpers are completely
manufactured in our facility located in Perkasie, PA. They are designed and engineered by Offroad enthusiasts just
like you to be rock solid at an affordable price. Hyline Offroad would like to thank you for your recent purchase
and look forward to serving you in the future.
Hyline Offroad Staff
T:\Hyline Offroad, LLC\Installation Instructions\TJ-YJ-20SRB\TJ-YJ-20SRB Installation Instructions.doc
Page 1 of 1
REV 2 6/1/2010