Hornady Annealing Kit - Manual (Page 2)

Reloading is an enjoyable and rewarding hobby that is easily conducted with
safety. Carelessness or negligence can make any hobby hazardous. All Hornady
reloading tools and supplies are designed with the user’s safety in mind. However,
since Hornady Mfg. Co. has no control over the manner in which products or
components are used in the reloading operation, we cannot assume any liability
for damage which may result from the use of the products or the information given
herein. It is the responsibility of you, the user, to follow generally accepted safety
practices.
GENERAL
Use all reloading tools and supplies as the manufacturer recommends.
Study the instructions carefully and become thoroughly familiar with the
operation of tools and supplies. Observe good housekeeping in the reloading
area. Keep all tools and supplies neat, clean and orderly. Promptly clean
all primer and powder spills. Know your components. Study manufacturer’s
manuals to properly identify all components and use them according to their
recommendations. Perform all tasks relative to reloading only when you can
give it your complete attention. Do not perform these activities when you are
ill or fatigued. Develop a routine to avoid mistakes and avoid haste. Always
wear eye protection. You assume reasonable risk during reloading-related
tasks and doing so without safety glasses is adding an unnecessary risk.
Use only laboratory tested and approved reloading and component data
and reloading procedures. We highly recommend the Hornady Handbook of
Cartridge Reloading as your source for current information.