Rock-Slide Engineering Ford F-250, F-350, F-450 Front Bumper - Manual (Page 5)

Installation Instruction RSEI 114
7. Install lower stiffening bracket from the bumper to the inside of the frame rail on
both frame rails
a. Attach the bracket to the bumper from the bottom up using the ½” x 1.5”
Button Head Bolts, washer and nut
b. Attach the bracket to the truck through the frame rail using the ½” x 5”
Bolt, washer, nut
8. Complete wiring on any installed lights
9. Enjoy!
Thank you for choosing Rock-Slide Engineering products. We value your business and
welcome your feedback/suggestions. If you have any concerns please contact us directly
@ 435-752-4580. We are here to help you!
Button Head bolt
from bumper through
bracket
Bolt through the frame
rail into the bracket,
then washer, nut