Rock-Slide Engineering Ford Super Duty Rear Bumper User Manual
Page 6
Installation Instruction RSEI 115
10. Install the provided white license plate mounting clips in the holes on the license plate face
11. Plug in 7 way tow plug
12.
After market lights can be installed in the light pockets (if equipped) after the bumper is
installed. They can also be installed in the pockets and secured prior to the bumper
installation. Complete wiring on any lights
13.
Enjoy!
Thank you for choosing Rock-Slide Engineering products. We value your business and welcome your
feedback/suggestions. If you have any concerns please contact us directly @ 435-752-4580. We are
here to help you!
License plate mounting clip
holes. When bumper is
properly installed, lights
should show through
evenly, tailgate should
open without touching
bumper, and gap between
tailgate and bumper should
be even all the way across