Rock-Slide Engineering RAPTOR – SLIDER - Manual (Page 5)

Installation Instruction RSEI 137
16. Tighten all the bolts on the back bracket
17. Attach the slider to the top bracket using the stainless steel bolts. Don’t forget to use
the anti-sieze on each stainless steel bolt
18. Tighten the bolts from the back bracket to the slider body
19. These holes are elongated to allow for any adjustments that need to me made.
20. When the slider is mounted make sure that you have not twisted or manipulated the
shape of the slider with you tightening sequence. THIS WILL CAUSE THE STEP TO NOT
WORK PROPERLY.
21. Double check all bolts to verify components and hardware are installed correctly and
securely to the truck
***Please note: Expect some variance in parts that may require you to adjust the
tension of bolts to make parts fit correctly and properly. Once all parts are installed,
we suggest then fully tightening all bolts again to fit securely***
Thank you for choosing Rock-Slide Engineering products. We value your business and
welcome your feedback/suggestions. If you have any concerns please contact us directly @
435-752-4580. We are here to help you!