Rock-Slide Engineering RAPTOR – WINCH PLATE User Manual
Rock-Slide Engineering For the car
Advertising
FORD RAPTOR WINCH PLATE INSTALLATION
FB-WP-RS
1. Remove factory bolts from bottom of frame rails.
2. Insert winch plate. Align holes on winch plate with factory holes on the frame rail.
3. Using the 7/16’’ washers provided reinsert the factory bolts and tighten.
4. Install winch using the hardware provided from the winch manufacture.
Thank you for choosing Rock-Slide Engineering products. We value your business and
welcome your feedback/suggestions. If you have any concerns please contact us directly @
435-752-4580. We are here to help you!
Advertising