AEM 30-71XX Infinity EMS Quick Start Guide - Manual (Page 22)

20
© 2014 AEM Performance Electronics
Infinity Quick Start Guide
4) Begin the Firmware Upgrade process.
a. Select the desired Configuration “Image” on the left.
i. If no images are present check C:\Program Files (x86)\AEM\Infinity Tuner\ and verify
.pakgrp file is there. If not, visit
http://www.aeminfinity.com , log in, and download
appropriate file.
b. Ensure "Keep Calibration Data" check-box is marked to save current calibration.
c. Click the “Begin” button to start the upgrade process.
5) Follow the message at the bottom, and turn the ignition switch OFF when instructed to do so.