AEM 25-201BK Universal High Volume Fuel Filter - Manual (Page 2)

AEM Performance Electronics
2205 126
th
Street Unit A Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-294

2011 Advanced Engine Management, Inc.
AEM Universal High Flow -10 AN Inline Fuel Filter
Congratulations on your purchase of the AEM Performance Electronics Universal High Flow -10
Inline Fuel Filter.
AEM’s engineers designed this filter with the racer in mind and with the intention of maximizing
flow, filtration and ease of installation.
Universal High Flow -10 AN Inline Fuel Filter Features:

Machined from 6061-T6 aluminum and hard anodized black

Flows up to 12.32 gpm @ 45 PSI and 2.63 gpm @ 6 PSI with -10 AN port fittings

Filters as low as 7 microns

Viton o-rings and gaskets ensure outstanding performance when using gasoline, alcohol
or gasoline/alcohol blended fuels

End caps are machined with -10 AN female fittings with o-ring receiver groove

End caps have pressure intensifiers for greater sealing of end gaskets
 2” OD x 10” length for easy mounting

Commonly available replacement filter cartridges

Laser etched with AEM logo, flow and filter replacement information
Universal High Flow -10 AN Inline Fuel Filter Replacement Element Part Numbers:
AEM 35-4004
NAPA 4004
WIX
24004
AEM Electronics Warranty
Advanced Engine Management, Inc. warrants to the consumer that all AEM High Performance
products will be free from defects in material and workmanship for a period of twelve (12) months
from date of the original purchase. Products that fail within this 12 month warranty period will be
repaired or replaced at AEM’s option, when determined by AEM that the product failed due to
defects in material or workmanship.
This warranty is limited to the repair or replacement of the AEM part. In no event shall this
warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for
special, incidental or consequential damages or cost incurred due to the failure of this product.
Warranty claims to AEM must be transportation prepaid and accompanied with dated
proof of purchase. This warranty applies only to the original purchaser of product and is non-
transferable. All implied warranties shall be limited in duration to the said 12 month warranty
period. Improper use or installation, accident, abuse, unauthorized repairs or alterations voids this
warranty.
An AEM Warranty Claim Form Must Accompany All Warranty Claims. Products returned to
AEM with no Return Goods Authorization and or No Warranty Claim Form may be rejected
and returned to sender.
AEM disclaims any liability for consequential damages due to breach of any written or implied
warranty on all products manufactured by AEM. Warranty returns will only be accepted be AEM
when accompanied by a valid Return Goods Authorization (RGA) number. Credit for defective
products will be issued pending inspection. Product must be received by AEM within 30 days of
the date RGA was issued.