AEM 30-2067 X-WiFi Wideband UEGO & EGT Controller User Manual
Page 10
Page 10
WIFI
AEM X-WIFI is preconfigured for adhoc communications with standard WIFI settings
that are suitable for most applications. The IP address, subnet mask, and SSID are
listed below:
IP address: 192.168.3.88
Subnet Mask: 255.255.0.0
SSID: AEM X-WIFI
The default X-WIFI settings are permanently stored in the module and can be restored
by the following sequence. Plug the USB cable into the pc/laptop. Press and hold
configuration button 1. With configuration button 1 depressed, plug the USB cable into
the X-WIFI and continue to hold configuration button 1 for eight seconds then release.
The AEM X-WIFI is also capable of secure infrastructure WIFI communications. The
communication settings are configurable in the advanced configuration window. The
advanced configuration window can be viewed using a standard hyper terminal
communication. The settings for the hyper terminal communication are shown below in
Figure 9.
Figure 8. Configuration Buttons
CONFIGURATION
BUTTON 1
CONFIGURATION
BUTTON 2