AEM 30-2710 Peak & Hold Injector Driver 10 Channel User Manual
AEM For the car
Installation Instructions
10 Ch Peak & Hold Injector Driver
PN 30-2710
WARNING:
,!
This installation is not for the electrically challenged! Use this product
with extreme caution! If you are uncomfortable with anything about
this, please refer the installation to an AEM trained tuning shop or call
800-423-0046 for technical assistance. You should also visit the AEM
Performance Electronics Forum at http://forum.aempower.com
NOTE: AEM holds no responsibility for any engine damage that
results from the misuse of this product!
This product is legal in California for racing vehicles only and should
never be used on public highways.
ADVANCED ENGINE MANAGEMENT INC.
2205 126th
Street Unit A, Hawthorne, CA. 90250
Phone: (310) 484-2322
Fax: (310) 484-0152
http://www.aempower.com
Instruction Part Number: 10-2710
2003-2007 Advanced Engine Management, Inc.