AEM 30-3003 Water Methanol Injection Inline Filter User Manual
Instruction manual
AEM Performance Electronics
2205 W 126
th
Street Unit A, Hawthorne, CA 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com/
Instruction Part Number: 10-3003 Rev B
© 2011 AEM Performance Electronics, Inc.
Page 1
1. Install filter on the low pressure side between the tank and pump. Splice into existing line by cutting tubing
with a sharp razor blade. Install filter with arrow on housing pointing in the direction of flow.
2. Ensure removable filter bowl is tight. Prime injection system and check for leaks.
3. Check that filter does not contact any hot or moving parts.
4. Filter will protect injection system from foreign particles and small debris down to 40 microns in size.
Periodically inspect and clean the filter element for longest service life.
Important Safety Notice Regarding Methanol
AEM strongly recommends that users never exceed a 50% methanol concentration when using any
AEM Water Methanol system or component.
Instruction Manual
P/N 30-3003 Water/Methanol Injection Filter
This product is legal in California for racing vehicles
only and should never be used on public highways.