AEM 30-3805-04 Universal V8 Core Accessory Harness - HALL Cam/MAG Crank User Manual
Page 3
3
© 2014 AEM Performance Electronics
can be used as a reference for any custom harness build based on the Infinity ECU.
Please read the entire User Manual prior to beginning any installation.
2
Optional Extension Harnesses for Modular Harness System
Optional extension harnesses compatible with the 3805 V8 harness system are
available.
30-3805-00 GM Injector Adapter Harness
Adapter harness that mates EV1 style injectors in standard GM cylinder order (odd
cylinders on one bank, even cylinders on other) to 30-3805 Core Harness.
30-3805-01 Ford Injector Adapter Harness
Adapter harness that mates EV1 style injectors in standard Ford cylinder order
(cylinders 1-4 on one bank, cylinders 5-8 on other) to 30-3805 Core Harness.
30-3805-02 Single Channel Ignition Adapter Harness
Adapter harness that mates AEM Single Channel Coil Driver (30-2841) to 30-3805
Core Harness. Coil driver takes 5v falling edge ignition trigger signal from Infinity and
outputs a 12v rising edge signal. 12v rising edge signal can either be used to trigger an
inductive coil directly or trigger a single channel CDI box (MSD 6A, etc).
30-3805-03 VR Crank & VR Cam Adapter Harness
Adapter harness that mates variable reluctance (VR) crank and cam sensors to 30-
3805 Core Harness. Legs to each sensor are 48” long.
30-3805-04 VR Crank & Hall Cam Adapter Harness
Adapter harness that mates variable reluctance (VR) crank sensor and Hall Effect cam
sensor to 30-3805 Core Harness. Legs to each sensor are 48” long.
30-3805-05 Hall Crank & VR Cam Adapter Harness
Adapter harness that mates Hall Effect crank sensor and variable reluctance (VR) cam
sensor to 30-3805 Core Harness. Legs to each sensor are 48” long.
30-3805-06 Hall Crank & Hall Cam Adapter Harness
Adapter harness that mates Hall Effect crank and cam sensors to 30-3805 Core
Harness. Legs to each sensor are 48” long.
30-3805-07 GM Stepper Idle Control Adapter Harness
Adapter harness that mates GM stepper idle control valve to 30-3805 Core Harness.
IAC connector is flat and meant for use with later model style control valves.
30-3805-08 Universal PWM Idle Control Adapter Harness
Flying lead to mate universal PWM idle control valve to 30-3805 Core Harness.
Connector to connect to control valve must be provided by end user.
30-3600 O2 Sensor Extension Harness